SPECIMEN
SPECIMEN — not a real certificate. This is SVEND's published example. The instrument does not exist and no calibration was performed. Its chain entry is genuine, so the verification below can be followed and will resolve; nothing on this document attests to a measurement.
DRAFT — not issued. This certificate is missing the authority it is issued under; the issuer's address; the customer; the calibration method; the decision rule behind the stated result.

Calibration Certificate

SPECIMEN Calibration Services
SPECIMEN — no accreditation is claimed SPECIMEN
No. SPECIMEN-2026-0001
Issued 2026-06-15

Item calibrated

InstrumentSPECIMEN Digital Caliper 0–150 mm
SerialSPECIMEN-0001
ManufacturerSPECIMEN
Model—
Type—
As received—

Customer

Name—
Contact—

Dates

Received—
Calibrated2026-06-15
Next due 2027-06-15

Method, conditions and traceability

Method—
Conditions—
Standard used—

Result

As foundNot reported on the certificate
ResultPassed
Decision rule—

Measurement results

PointNominalAs foundAs left ToleranceUncertaintyUnits
0 mm 0.0 — — 0.02 0.004 mm
25 mm 25.0 25.004 25.004 0.02 0.004 mm
50 mm 50.0 50.007 50.007 0.02 0.004 mm
100 mm 100.0 100.011 100.011 0.02 0.004 mm

Issued under the authority of

OrganizationA. Specimen
FunctionMetrology Technician
Check this certificate. Scan the code, or visit https://svend.ai/verify/1a2f98e46e057bf84273f41a2f1141d9b5b4ae791c71cc057dc4ee990d530f8c/ — it confirms whether this document matches the record its issuer keeps, and whether that record has been altered since.
Entry #0 · 1a2f98e46e057bf84273f41a2f1141d9b5b4ae791c71cc057dc4ee990d530f8c
These results relate only to the item calibrated, as identified above. This certificate may not be reproduced other than in full without the written approval of the issuer.
END OF CERTIFICATE · No. SPECIMEN-2026-0001